USB AUDIO INTERFACE
Bantuan -

TASCAM US-4x4HR

TASCAM US-4x4HR

TASCAM US-4x4HR

  • Pengirim: Bliaudio-spr
  • Asal Pengiriman: Jakarta Barat, DKI Jakarta
  • Kode Produk: Tascam US-4x4HR
  • Tersedia: Dalam Stok
  • Rp 4.170.000

Specifications

Audio resolution
Sampling frequencies44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Quantization bit depth24-bit
Analogue inputs
Mic inputs (balanced)XLR-3-31 equivalent
(1: GND, 2: HOT, 3: COLD)
Input impedance2.2 kΩ
Rated input level–7 dBu (0.346 Vrms)
Maximum input level+9 dBu (2.183 Vrms)
Gain range56 dB
Instrument inputs (unbalanced, MIC/LINE INST switch set to INST)6.3-mm standard TS stereo jacks
(Tip: HOT, Sleeve: GND)
Input impedance≥1 MΩ
Rated input level–6 dBV (0.501 Vrms)
Maximum input level+10 dBV (3.162 Vrms)
Gain range56 dB
Line inputs (balanced, MIC/LINE INST switch set to MIC/LINE)6.3-mm standard TRS stereo jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
Input impedance10 kΩ
Rated input level+4 dBu (1.228 Vrms)
Maximum input level+20 dBu (7.75 Vrms)
Gain range56 dB
Analogue outputs
Line outputs (balanced)6.3-mm standard TRS stereo jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
  Output impedance210 Ω
  Rated output level+4 dBu (1.228 Vrms)
  Maximum output level+20 dBu (7.746 Vrms)
Headphone output (PHONES)6.3-mm standard stereo jack
  Maximum output power45 mW + 45 mW or higher (THD+N 0.1% or less, into 32 Ω load)
Control inputs/outputs
MIDI IN connector5-pin DIN
  FormatMIDI standard
MIDI OUT connector5-pin DIN
  FormatMIDI standard
USB4-pin USB, Type C
  Transfer rateUSB 2.0 High Speed (480 MBit/s)
Audio performance
Mic amp EIN (equivalent input noise)≤−128 dBu (150 Ω termination, GAIN knob at maximum)
Frequency response, MIC/LINE input 
  44.1 kHz / 48 kHz20 Hz – 20 kHz, +0 dB/−0.4 dB (JEITA)
  88.2 kHz / 96 kHz20 Hz – 40 kHz, +0 dB/−0.4 dB (JEITA)
Frequency response, LINE output
  44.1 kHz / 48 kHz20 Hz – 20 kHz, +0.2 dB/−0.1 dB (JEITA)
  88.2 kHz / 96 kHz20 Hz – 40 kHz, +0.2 dB/−0.4 dB (JEITA)
S/N ratio110 dB (MIC input, GAIN knob at minimum, 20-kHz SPCL LPF, A-weighted)
108 dB (LINE input, GAIN knob at minimum, 20-kHz SPCL LPF, A-weighted)
110 dB (LINE output, LINE OUT knob at maximum, 20-kHz SPCL LPF, A-weighted)
Distortion (THD+N)0.0013 % (MIC IN, 1 kHz sine wave, −5 dBFS input, GAIN knob at minimum, 20 kHz SPCL LPF)
0.0011 % (LINE IN, 1 kHz sine wave, −5 dBFS input, GAIN knob at minimum, 20 kHz SPCL LPF)
0.0012 % (LINE OUT, 1 kHz sine wave, −4 dBFS input, LINE OUT knob at maximum, 20 kHz SPCL LPF)
Crosstalk attenuation≥95 dB (MIC/LINE input to LINE output, 1 kHz sine wave, GAIN knob at minimum)
Computer system requirements
Windows 
  Computer hardware requirementsWindows computer with a USB 2.0 port
  CPU/processor speed2 GHz or faster dual core processor (x86)
  Memory2 GB or more
Important: Operation of this unit was confirmed using standard computers that meet the above requirements. This does not guarantee operation with all computers that meet the above requirements. Even computers that meet the same system requirements might have processing capabilities that differ according to their settings and other operating conditions
  Supported audio driversASIO2.0, WDM, MIDI
macOS 
  CPU/processor speed2 GHz or faster dual core processor
  Memory2 GB or more
  Supported audio driversCore Audio, Core MIDI
iOS 
  Supported audio driversCore Audio
Important: To connect an iOS device that has a Lightning connector, a genuine Apple Lightning to USB Camera Adapter (sold separately) is necessary.
Power supply and other specifications
Power supply 
  When used with a computerUSB bus power or dedicated AC adapter below
  When used with an iOS deviceDedicated AC adapter (Tascam PS-P1220E, DC 12 V)
Power consumption2.25 W
External dimensions (W × H × D, including protrusions)296 mm × 65 mm × 160 mm
Weight1.6 kg
Operating temperature range5–35 °C

Tulis ulasan

Catatan: HTML tidak dapat diterjemahkan!
    Buruk           Baik
Captcha
Tags: Recording