Garansi Distributor 1 Tahun

PCM Recorder with Shure Jack

TASCAM’s DR-10C-series recorders connect to your lavaliere microphone to create a compact recording system that fits on a belt pack. Two versions are available: the DR-10CS for Sennheiser mics and DR-10CH for Shure microphones. Additionally, option kits are available for Sony/RAMSA (AK-DR10CR.) and Shure (AK-DR10CH)

The DR-10CS & CH recorders have both inputs and outputs, so they can either be used stand-alone or with a wireless transmitter. When used with a transmitter, the DR-10C acts as a backup to protect against wireless dropouts during recording. For lectures or worship services, the DR-10C can record the entire program before it gets to the front of house system. And for events like weddings and reality TV production, the DR-10C is a compact recording system for body mics.

The lightweight DR-10C runs for hours on a single AAA battery. It records to standard microSD media. Recording features include auto-gain and a low-cut filter for simple setup. Its dual recording feature records a safety track of your audio at a lower level, so in case of distortion you have a non-clipped backup. When multiple units are used, an infrared signal can synchronize settings between recorders.

Whether using it as a backup or as a primary recording system, there’s nothing else like the TASCAM DR-10CS and CH.

DR-10C SERIES SPECIFICATIONS

Recording media	microSD card(64MB to 2GB),  microSDHC card(4GB to 32GB)
Media discharging	Push-Push type (Guard cover mounted)
Recording format	WAV(BWF)
Sampling frequency	48kHz
Quantization bit rate	24bit
Number of channels	1-channel (Mono)
Analog audio Inputs
Connector	More info for Pin Assign, please click here
DR-10CS	Compatible with SENNHEISER 3.5mm(1/8") TRS jack with screw lock
DR-10CH AK-DR10CH	Compatible with SHURE Mini XLR 4pin, Male (TA4M adapter)
AK-DR10CR	Compatible with SONY Hirose 4pin Female KMC-9BPD-4S (SMC9-4S adapter) Compatible with RAMSA  Hirose 4pin Female KMC-9BPD-4S (KMC-9BRF-4S adapter) * Please utilize the slide switch for SONY / RAMSA selection.
MIC input gain	LOW / MID / HIGH
Input impedance	32kohm or more
PHONES
Connector	3.5mm(1/8") stereo mini jack (DUAL MONO)
USB
Connector	Micro-B type 4pin
Protocol	USB2.0 HIGH SPEED mass storage class
Power	1 AAA battery (Alkaline battery/ Ni-MH battery / Lithium battery),  USB bus power
Power consumption	0.45W
Battery operation time	WAV,24 bit / 48kHz Rec, without headphones, limiter : OFF , Dual Rec : OFF , JEITA Rec
Alkaline battery (EVOLTA)	Approx 10 hours
Ni-MH battery (eneloop)	Approx 8 hours
lithium battery (Energizer ULTIMATE LITHIUM)	Approx 15.5 hours
Battery (RTC)	Lithium × 1(built in with soldering)
Dimensions
DR-10CS / DR-10CH	52(W) × 55.6(H) × 24.4(D) mm 2.0(W) × 2.2(H) × 1.0(D) inch
AK-DR10CH	49.2(W) × 20.9(H) × 19.2(D) mm 1.9(W) × 0.8(H) × 0.8(D) inch
AK-DR10CR	49.2(W) × 20.9(H) × 21.5(D) mm 1.9(W) × 0.8(H) × 0.8(D) inch
Weight
DR-10CS / DR-10CH	63g (including battery) / 51g (without battery)
AK-DR10CH	16.3g
AK-DR10CR	16g
Operating temperature	0˚C to 40˚C
Accessories
DR-10CS / DR-10CH	USB cable,Connection cable, Carrying case, Clip, Belt, Owner's Manual (including warranty)
AK-DR10CH / AK-DR10CR	Connection cable, Spare screws × 3

 

Audio performance
Frequency response	20Hz to 22kHz +1/-2dB (IN to PHONES)

 

Computer compatibility
Windows
OS	Windows 7, Windows 8, Windows 8.1
Macintosh
OS	OS X Mountain Lion(V10.8), OS X Mavericks(10.9)

 

DR-10C Series Pin Assign

DR-10CS
	SENNHEISER Compatibility    Tip ： Mic   Ring： Line IN-OUT Connection. (Not available for DR-10C) Sleeve： GND

 

DR-10CH / AK-DR10CH
	SHURE Compatibility    1： Ground   2： +5VDC Bias When use the DR-10C with a mic, select "MIC BIAS" under Menu, and switch to "ON" for the mic bias supply from the unit itself. 3： Audio   4： Active Load Two-way IN-OUT connection. Internal Audio is available in the DR-10C.

AK-DR10CR

* Please utilize the slide switch for SONY / RAMSA selection.

SONY Compatibility    1： +5V When use the DR-10C with a mic, select "MIC BIAS" under Menu, and switch to "ON" for the mic bias supply from the unit itself. 2： HOT Two-way IN-OUT connection. Not available in the DR-10C. 3： COLD   4： GND   RAMSA Compatibility    1： HOT   2： HOT Two-way IN-OUT connection. it does not support 2pin on a mic. 3： +3.5V When use the DR-10C with a mic, select "MIC BIAS" under Menu, and switch to "ON" for the mic bias supply from the unit itself. 4： GND

 

DR-10C Series Tested Transmitter and Lavalier Microphone List

Last update:May 25, 2015

DR-10CS
SENNHEISER
Transmitter	SK 100, SK 300, SK AVX
Lavalier Microphone	ME 2, ME 4, MKE 1-ew, MKE 2-ew

 

DR-10CH, AK-DR10CH
SHURE
Transmitter	UR1M, ULX1, SLX1, FP1
Lavalier Microphone	WL183, WL184, WL185, WL93

 

AK-DR10CR
SONY
Transmitter	WRT-850
Lavalier Microphone	ECM-77BC
RAMSA
Transmitter	WX-TB841, WX-TB840, WX-DT130
Lavalier Microphone	WM-LA02, WM-LA004

 

 

DR-10C Series Tested media List

Last update:September 30, 2015

Maker	Series	Model	Capacity	Result
SanDisk	SanDisk® microSDHC™ Memory Card (Class4)	SDSDQ-008G-J35U	8GB	OK
		SDSDQ-004G-J35U	4GB	OK
TOSHIBA	EXCERIA™  UHS-I microSDHC™ Memory Card (U3, Class10)	MUH-B016G	16GB	OK

 

Maker	Series	Model	Capacity	Result
SanDisk	SanDisk Ultra® PLUS microSDHC™  UHS-I Memory Cards (Class10)	SDSDQUP-016G-J35A	16GB	OK
		SDSDQUP-008G-J35A	8GB	OK
	SanDisk Ultra® microSDHC™  UHS-I Memory Cards (Class10)	SDSDQUL-016G-J35A	16GB	OK
		SDSDQUL-008G-J35A	8GB	OK
Lexar	Lexar® High-Performance microSDHC™ UHS-I Card (633x) (Class10)	LSDMI16GBBJP633R	16GB	OK
	Lexar® High-Performance microSDHC™ UHS-I Card (300x) (Class10)	LSDMI16GBBJP300A	16GB	OK
Panasonic	Premium microSDHC™ UHS-I Card (Class10) R:45MB/s	RP-SMGA32GJK	32GB	OK
		RP-SMGA16GJK	16GB	OK