Radial SB 2 Direct Box
Bantuan -

Radial SB 2 Direct Box

Radial SB 2 Direct Box

Radial SB 2 Direct Box

  • Pengirim: Bliaudio-skr
  • Asal Pengiriman: Jakarta Utara, DKI Jakarta
  • Kode Produk: Radial SB 2
  • Tersedia: Dalam Stok
  • Rp 1.528.000

Garansi Distributor 1 Tahun


Passive Direct Box


* Passive DI for bass, acoustic and keyboard

* Ultra compact to fit in your guitar case

* Plug & play easy to use feature set

* Transformer isolation eliminates noise


The Radial StageBug SB-2 Passive is a high-performance direct box made for players who are on the move! Made to fit inside of a guitar case, the SB-2 is ultra compact yet is feature-packed to ensure great performance on any stage.

The compact design begins with a ¼" input and thru-put to feed the on-stage amp. This connects to the custom made Eclipse ET-DB3 transformer which performs the impedance matching and balances the signal. When using extra high output instruments, a -15dB pad can be inserted into the signal path. This enables the SB-2 to be used with active basses and digital pianos that often tend to overload the input side of the interface. An innovative stereo-to-mono merge function provides a convenient way to connect stereo keyboards and computers without having to reset the source for mono operation, saving time and input channels on the PA. The SB-2 output features an XLR wired to the AES standard with pin-2 hot.

Once connected, the SB-2 delivers a smooth warm sound reminiscent of older vintage gear. The Eclipse ET-DB3 transformer is magical in its ability to handle extreme signal levels with a natural compression that is pleasing to the ears. The transformer also helps eliminate hum and buzz caused by ground loops by isolating the input from the output. This is augmented with a ground lift switch that lifts pin-1 on the XLR for quiet, professional results.

These features make the StageBug SB-2 a great choice for electric bass, acoustic guitar and keyboards where small size and big performance matters!


Specifications   
Audio circuit type: Passive, transformer based
Number of channels:Single channel (mono)
Frequency response: 20Hz ~ 20KHz (± 0.5dB)
Dynamic range: 115dB 
Maximum input: +20dB 
Total harmonic distortion: 0.005% @ 1kHz
Phase deviation: 3° @ 100Hz; 8° @ 50Hz 
Input impedance: 140k Ohms, unbalanced 
Output impedance: 1k Ohms, balanced 
Features   
Transformer:Eclipse ET-DB3, 12:1 ratio
Shield:Copper foil
Input pad: -10dB  
Auto merge: Sums left & right sources to mono
Ground lift: Disconnects pin-1 at XLR output 
XLR configuration: AES standard (pin-2 hot) 
Connectors:1/4" in & thru, XLR-M out
General   
Construction: 14 gauge steel chassis & outer shell
Finish:Durable powder coat
Size: (L x W x D)4.5" x 1,85" x 1.35" (114mm x 47mm x 34mm)
Weight: 0.55 lbs (250 grams)
Shipping size: (L x W x D):8" x 5" x 3" (203mm x 127mm x 76mm)
Shipping weight:0.8 lbs (365 grams)
Power: Passive, no power required 
Conditions:For use in dry locations only between 5°C and 40°C

Tulis ulasan

Catatan: HTML tidak dapat diterjemahkan!
    Buruk           Baik
Captcha