POWERSOFT T604
Customer Care -

POWERSOFT T604

POWERSOFT T604

POWERSOFT T604

  • Vendor: Bliaudio-skr
  • Shipping Origins: Jakarta Utara, DKI Jakarta
  • Product Code: POWERSOFT T604
  • Availability: In Stock
  • Rp 64,766,500

Overview

The T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end, a WiFi access point at the other end and the amplifiers in-between.

MyPowersoft services are available for this product


  • The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium-sized systems and stage monitors. The T Series can be controlled and configured in different ways.
  • Full control with a PC running Armonía.
  • Control from the front panel display for features like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring parameters.
  • Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point for easy control.
  • Group controllable advanced EQ with raised cosine filters
  • Large preset library
  • Preset compatibility with X Series
  • Very long FIR filters (42.6 ms)
  • Control and monitoring through ArmoníaPlus
GENERAL
Output power per channel
Output power per channel1500W @ 2 Ω1500 W @ 4 Ω1250 W @ 8 Ω
Bridge mode3000 W @ 4 Ω3000 W @ 8 Ω
Max output voltage / current
Max unclipped output voltage @8 Ω145 Vpeak
Current50 Apeak
AC MAIN POWER
Power supplyUniversal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement100-240 V ±10%, 50-60 Hz
Operating voltage90 V – 264 V
Power consumption / Current draw
1/8 of max output power @ 4 Ω120 V: 1054 W – 9.5 A230 V: 1027 W – 5.2 A
THERMAL
Thermal dissipation
1/8 of max output power @ 4 Ω120 V: 1039 BTU/h230 V: 944 BTU/h

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha