Audio Technica AT2050
Customer Care -

Audio Technica AT2050

Audio Technica AT2050

Audio Technica AT2050

  • Vendor: Bliaudio-skr
  • Shipping Origins: Jakarta Utara, DKI Jakarta
  • Product Code: AT2050
  • Availability: In Stock
  • Rp 3,392,000

Audio Technica AT2050 
Overview 

The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more. 


Features

  • Three switchable polar patterns: omni, cardioid, figure-of-eight
  • Switchable 80 Hz high-pass filter and 10 dB pad
  • Large diaphragm for smooth, natural sound and low noise
  • State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
  • Includes shock mount & protective pouch

Spesification 

ELEMENTExternally-polarized (DC bias) condenser
POLAR PATTERNSCardioid, 
Omnidirectional, 
Figure-of-Eight
FREQUENCY RESPONSE20-20,000 Hz
LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY–42 dB (7.9 mV) re 1V at 1 Pa
IMPEDANCE120 ohms
MAXIMUM INPUT SOUND LEVEL149 dB SPL, 1 kHz at 1% T.H.D.; 
159 dB SPL, with 10 dB pad (nominal)
NOISE17 dB SPL
DYNAMIC RANGE (typical)132 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO77 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS11-52V DC, 4.7 mA typical
SWITCHESPolar selection; 
Flat, roll-off; 
10 dB pad (nominal)
WEIGHT412 g (14.5 oz)
DIMENSIONS170.0 mm (6.69") long, 
52.0 mm (2.05") maximum body diameter
OUTPUT CONNECTORSIntegral 3-pin XLRM-type
ACCESSORIES FURNISHEDAT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
AUDIO-TECHNICA CASE STYLER5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha