RADIAL BASSBONE V2 Bass Preamp & Boost
Customer Care -

RADIAL BASSBONE V2 Bass Preamp & Boost

RADIAL BASSBONE V2 Bass Preamp & Boost

RADIAL BASSBONE V2 Bass Preamp & Boost

  • Vendor: Bliaudio-skr
  • Shipping Origins: Jakarta Utara, DKI Jakarta
  • Product Code: RADIAL BASSBONE V2 Bass Preamp & Boost
  • Availability: In Stock
  • Rp 6,760,000

Bass Preamp & Boost

The Bassbone V2™ is a two channel bass preamp with a number of customizable features to suit any type of setup or playing style, while providing superb audio quality ideal for a live stage or studio recording.

  • Two-channel bass preamp for 1 or 2 basses
  • Shared effects loop with footswitch
  • Variable clean boost circuit and EQ controls
  • PZB booster and piezo input for upright bass
  • Built-in Radial DI with balanced output for the PA.
  • The ultimate bass control center

    The Bassbone V2 combines high quality audio performance with the ability to take control of your tone and configure each feature to match your ideal setup. Seamlessly switch between upright and electric basses, while tailoring the signal from the upright with a three band EQ, high-pass filter, and a high impedance input for a more natural tone. You can engage your effects pedals with a single footswitch, and assign them to either input individually, or share them across both. A wet/dry control for the effects loop provides the ability to blend the original bass signal in with the output from the pedals, preserving the tone and clarity of your instrument. The Bassbone V2 also features a powerful clean boost that can be activated with a footswitch, or reconfigured as a mute switch for silent tuning on stage.

    Specifications
    Audio circuit type:Discrete class-A FET input with low noise ICs.
    Frequency response:20Hz ~ 18kHz
    Dynamic range:85dB
    Gain:Unity gain device
    Total harmonic distortion:0.05% @ -15dBu
    Intermodulation Distortion:0.2% @ -20dBu
    Input Impedance:220K Ohms input A, 220K/10M Ohms input B
    Output Impedance:300 Ohms at XLR
    Equivalent Input Noise:-92dBu at XLR
    Noise:-100dB
    Maximum Input:+7 dBu
    Features
    180° polarity reverse, Ground lift, HPF, Boost
    Input Connectors:1/4"
    Output Connectors:1/4", XLR
    General
    Construction:14 gauge steel
    Size (L x W x D):5.5" x 4.2" x 2" (203 x107 x 48mm)
    Weight:2.55lb (1157 grams)
    Power:+15VDC/400mA adapter included
    Conditions:For use in dry locations only between 5°C and 40°C

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha