AUDIO TECHNICA PRO 49QL WITH AT8668S
AUDIO TECHNICA PRO 49QL WITH AT8668S
- Pengirim: Bliaudio-skr
- Asal Pengiriman: Jakarta Utara, DKI Jakarta
- Kode Produk: AUDIO TECHNICA PRO 49QL WITH AT8668S
- Tersedia: Dalam Stok
-
Rp 5.599.000
Anti-Shock Microphone Stand
AT8668S
Anti-shock microphone stand effectively isolate mounted microphones from impact vibration and me-chanical noise normally transmitted from the surface A press switch that controls the microphone with indicater Intended for use with microphones stood on lecterns, pulpits, conference tables and similar surfaces Come with a low reflectance and matte-black finish
These Audio-technica anti-shock microphone stand effectively isolate mounted microphone from impact vibration and mechanical noise normally transmitted from the surface. They are intended for use with microphones stood on lecterns, pulpits, conference tables and similar surfaces.
Ideal for use with gooseneck microphones and other quick-mount type microphone using industrial standard XLRM 3-pin type connectors.
AT8668S MUTE SWITCH
The At8668S features a press-on/press-off switch that controls the microphone, muting it by 55 dB at 1,000 Hz. The circuitry also operates a light in the switch, powered by the 24-48V phantom source, to indicate when the mic is "on". Regardless of the switch postion, the actual mic operating voltage will be approximately 10-12V less than the phantom source voltage.
These Audio-technica anti-shock microphone stand effectively isolate mounted microphone from impact vibration and mechanical noise normally transmitted from the surface. They are intended for use with microphones stood on lecterns, pulpits, conference tables and similar surfaces.
Ideal for use with gooseneck microphones and other quick-mount type microphone using industrial standard XLRM 3-pin type connectors.
AT8668S MUTE SWITCH
The At8668S features a press-on/press-off switch that controls the microphone, muting it by 55 dB at 1,000 Hz. The circuitry also operates a light in the switch, powered by the 24-48V phantom source, to indicate when the mic is "on". Regardless of the switch postion, the actual mic operating voltage will be approximately 10-12V less than the phantom source voltage.
AT8668S Specifications
Phantom Power Requirements 24-48V DC, 3 mA typical Output Impedance 360 ohms Insertion Loss 1 dB (150 ohm source, 100k ohm load) Mute Attenuation 55 dB at 1000Hz 35 dB at 100Hz 30 dB at 50Hz (150 ohm source, 100k ohm load) Mic Attachment XLRF - type, XLRM - type, Switch with LED Dimensions 112mm X 142mm X 40mm (Width X Depth X Height) Weight 1.2 kg
Phantom Power Requirements | 24-48V DC, 3 mA typical |
Output Impedance | 360 ohms |
Insertion Loss | 1 dB (150 ohm source, 100k ohm load) |
Mute Attenuation | 55 dB at 1000Hz 35 dB at 100Hz 30 dB at 50Hz (150 ohm source, 100k ohm load) |
Mic Attachment | XLRF - type, XLRM - type, Switch with LED |
Dimensions | 112mm X 142mm X 40mm (Width X Depth X Height) |
Weight | 1.2 kg |
Audio Technica PRO 49QL
OVERVIEW
The PRO 49QL quick-mount double-gooseneck cardioid condenser microphone is designed to plug into any standard XLRF-type surface or cable connector. With a flat, smooth frequency response and self-contained electronics, this mic features a quiet, fixed-placement, long-life gooseneck and wide-range condenser element with low-mass diaphragm for superior performance. Available in two lengths: 13.07" (PRO 49Q); 16.46” (PRO 49QL).
FEATURES
· Wide-range condenser element with low-mass diaphragm for superior performance
· Self-contained electronics eliminate need for external power modules
· Flat, smooth frequency response
· Quiet, fixed-placement long-life gooseneck
· Plugs into any standard XLRF-type surface or cable connector
· Overall length of 16.46" (418.0 mm)
· Also available in a 13.07" (332.0 mm)-long version as PRO 49Q
SPESIFIKASI
ELEMENT | Fixed-charge back plate, permanently polarized condenser |
POLAR PATTERN | Cardioid |
FREQUENCY RESPONSE | 70-16,000 Hz |
OPEN CIRCUIT SENSITIVITY | -37 dB (14.1 mV) re 1V at 1 Pa |
IMPEDANCE | 100 ohms |
MAXIMUM INPUT SOUND LEVEL | 134 dB SPL, 1 kHz at 1% T.H.D. |
DYNAMIC RANGE (typical) | 106 dB, 1 kHz at Max SPL |
SIGNAL-TO-NOISE RATIO | 66 dB, 1 kHz at 1 Pa |
PHANTOM POWER REQUIREMENTS | 9-52V DC, 2 mA typical |
WEIGHT | 3.0 oz (84 g) |
DIMENSIONS | 16.46" (418.0 mm) long, |
OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
ACCESSORY FURNISHED | AT8146 windscreen |
AUDIO-TECHNICA CASE STYLE | M23 |