Audio-Technica AT2035 Cardioid Condenser Microphone
Customer Care -

Audio Technica AT2035 Cardioid Condenser Microphone

Audio Technica AT2035 Cardioid Condenser Microphone

Audio Technica AT2035 Cardioid Condenser Microphone

  • Vendor: Bliaudio-skr
  • Shipping Origins: Jakarta Utara, DKI Jakarta
  • Product Code: AT2035
  • Availability: In Stock
  • Rp 2,192,000

Audio-Technica AT2035 Cardioid Condenser Microphone

OVERVIEW

Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.


FEATURE

  • Large diaphragm for smooth, natural sound and low noise

  • High SPL handling and wide dynamic range provide unmatched versatility

  • Custom shock mount provides superior isolation

  • Switchable 80 Hz high-pass filter and 10 dB pad

  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

  • Includes custom shock mount & protective pouch


SPESIFICATION

ELEMENTFixed-charge back plate, permanently polarized condenser
POLAR PATTERNCardioid
FREQUENCY RESPONSE20-20,000 Hz
LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY-33 dB (22.4 mV) re 1V at 1 Pa
IMPEDANCE120 ohms
MAXIMUM INPUT SOUND LEVEL148 dB SPL, 1 kHz at 1% T.H.D.; 
158 dB SPL, with 10 dB pad (nominal)
NOISE12 dB SPL
DYNAMIC RANGE (typical)136 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO82 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS11-52V DC, 3.8 mA typical
SWITCHESFlat, roll-off; 
10 dB pad (nominal)
WEIGHT403 g (14.2 oz)
DIMENSIONS170.0 mm (6.69") long, 
52.0 mm (2.05") maximum body diameter
OUTPUT CONNECTORIntegral 3-pin XLRM-type
ACCESSORIES FURNISHEDAT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
AUDIO-TECHNICA CASE STYLER5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha