APART ZONE4 4-zone stereo pre-amplifier
Customer Care -

APART ZONE4 4-zone stereo pre-amplifier

APART ZONE4 4-zone stereo pre-amplifier

APART ZONE4 4-zone stereo pre-amplifier

  • Vendor: Bliaudio-sgh
  • Shipping Origins: Jakarta Pusat, DKI Jakarta
  • Product Code: APART ZONE4
  • Availability: In Stock
  • Rp 13,171,500

ZONE4

4-zone stereo pre-amplifier

The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect.

There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.

The ZONE4 can be controlled from the front panel (with digital display), via the RS232-connector or via the IR serial. On top of that you can control the unit via the ZONE4R remote control panels. Thes control panels have a clear LED status display and buttons for music level, MIC/MIX level, source select and mute controls. Because the remote is wired with a normal CAT5 cable, it is very easy to install.

On the output side, there is a line input selector and music level control per zone. A clear digital display makes it easier to monitor the functioning of the unit. Further, there are independent MIC-MIX level control and bass-treble control per zone.

The unit is 19” format and comes standard with removable brackets. The removable metal cover (included) protects your MIC-settings.

- 19" (483 mm wide) rack mounting : yes 

- height- rack units (1U=44 mm) 1 U depth (build in) 196 mm depth (incl front) 205 mm

- power supply  : 115 - 230 VAC, power consumption (max) : 25 watts

- zone outputs : 4, stereo output level balanced (dB) 0

- output level unbalanced (dB) 0

- crosstalk (dB) >75 music, level control : yes

- MIC level control : yes,  VCA level control : no

- source selection per zone : yes 

- MIC inputs balanced : 3, MIC inputs unbalanced : 0 

- inputs with Phantom power : 2,  Phantom power voltage : 18 volts 

- noise gate on MIC : no

- selectable input dynamics : no 

- selectable output dynamics : no

- line input balanced : 0 line 

- input unbalanced : 4 stereo

- S/PDIF input : no 

- tone control : yes

- RS232 (serial communication port) : yes 

- wall panel controls : yes, priority input contact : yes 

- maximum qty paging Mics : 4

- chime : no, emergency input : yes

- priority output contact : no, priority levels 2

- frequency response (in Hz) : 20 - 30 k 

- applicable in 100V : yes

- applicable low impedance : yes 

- Net weight product (kg) 2.75

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha