APART REVAMP2250 2-channel bridgeable digital power amplifier
Customer Care -

APART REVAMP2250 2-channel bridgeable digital power amplifier

APART REVAMP2250 2-channel bridgeable digital power amplifier

APART REVAMP2250 2-channel bridgeable digital power amplifier

  • Vendor: Bliaudio-sgh
  • Shipping Origins: Jakarta Pusat, DKI Jakarta
  • Product Code: APART REVAMP2250
  • Availability: In Stock
  • Rp 9,787,500


REVAMP2250

2-channel bridgeable digital power amplifier, 2 x 250W, 4ohm

REVAMP2250 is a professional 2-channel digital power amplifier with 2 x 350 watts output power @ 4 ohms, but is also bridgeable (1 x 700 watts @ 8 ohms). The unit incorporates a high efficient SMPS power supply and outputs with efficient Class D output topology.

The digital signal processor inside operates with one simple push button at the back of the unit to select an operating mode (6 presets). An example of a preset is the combination CH1 subwoofer and CH2 trafo load.  In this example you have a low-pass filter for increased stability when using 100 volt transformers on the output, allowing you to use 100 volt speakers as top speakers combined with a standard low impedance subwoofer. With the other presets channels can be bridged, high pass filters can be applied to a channel...

The very intuitive front display shows what is going on with one blink of an eye. Thanks to our own designed automatic protection system (patent pending) with smart use of a compressor/limiter topology we bring our switched mode power supply to an unexpected high level! This manifests itself in a great dynamic power with an unseen musicality and exceptional dynamic sound.

Ease of use, high-tech, reliability and big output power has never been as cleverly combined as in this REVAMP2250 amplifier.

- dynamic output power 4 ohms : 2 x 350 watts 

- RMS output power 4 ohms : 2 x 250 watts

- dynamic output power 8 ohms : 2 x 175 watts 

- RMS output power 8 ohms : 2 x 125 watts

- dynamic output power bridged 8 ohms : 700 watts 

- output power RMS bridged 8 ohms : 500 watts

- minimum impedance load per channel : 4 ohms 

- minimum impedance load bridged per channel : 8 ohms

- power consumption (max) : 600 watts 

- 19" (483 mm wide) rack mounting : yes

- height- rack units (1U=44 mm) 1 U depth (build in) 230 mm

depth (incl front) 239 mm 

- power supply 115 - 230 VAC

- power supply technology : switching mode power supply 

- output channels : 2

- line input balanced : 2 

- line input unbalanced : 2

- channel separation > 74 dB @ 1 kHz 

- power amp topology class-D

- frequency response (in Hz) 10 - 24 k 

- cooling system : convection

- applicable low impedance : yes 

- Net weight product (kg) 3.10

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha