Radial Trim Two Passive Stereo DI Box
Customer Care -

Radial Trim Two Passive Stereo DI Box

Radial Trim Two Passive Stereo DI Box

Radial Trim Two Passive Stereo DI Box

  • Vendor: Bliaudio-skr
  • Shipping Origins: Jakarta Utara, DKI Jakarta
  • Product Code: Trim Two
  • Availability: In Stock
  • Rp 3,384,000

Trim-Two

Passive Stereo Direct Box with Level Control

The Trim-Two™ is a passive stereo direct box designed for use with laptop computers and other consumer playback devices, eliminating hum and buzz from ground loops while providing an easy-access level control for quick adjustments on stage.

·        Stereo direct box for line level sources

·        Passive signal path with transformer isolation

·        Eliminates hum and buzz when connecting to the PA

·        Level control & mono sum switch

A noise-free interface for your audio devices

The Trim-Two allows you to connect any playback device and interface it with balanced pro audio equipment without signal loss or hum and buzz from ground loops. It features two transformers which isolate and balance the audio output from your source device, eliminating noise and allowing you to use long cable runs without signal degradation. A handy mono sum switch makes it easy to reduce the output channel count or send the same signal to two destinations at once, and an accessible level control gives you the ability to adjust levels in an instant. Multiple input connector types make it easy to hook up any consumer line level playback source, from laptops & smartphones to DJ equipment. The completely passive design means that you never have to worry about powering the Trim-Two, making it truly plug & play.

 

Specifications

Audio circuit type:

Passive, transformer based

Transformer:

Custom

Number of channels:

Dual channel (stereo)

Frequency response:

20Hz to 20KHz

Dynamic range:

>100dB

Total harmonic distortion:

0.009%

Phase Deviation:

<10°

Input Impedance:

10K Ω, unbalanced

Output Impedance:

2.8K Ω, balanced

Maximum Input:

+20dB @ 20Hz

Features

Input pad, Mono Sum, Ground lift

Input Connectors:

1/4" RCA and 3.5mm input

Output Connectors:

XLR-M output

Extras:

Copper foil shield

General

Construction:

14 gauge steel chassis & outer shell

Size (L x W x D):

3.3" x 5.0" x 2" (84 x 127 x 48mm)

Weight:

1.55 lbs (0.70 kg)

Shipping size (L x W x D):

4" x 3" x 6.5" (102 x 76 x 165mm)

Shipping weight:

1.92 lbs (0.87 kg)

Power:

Passive, no power required

Conditions:

For use in dry locations only between 5°C and 40°C

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha